Last updated on September 16th, 2024
The basic configuration is optimal for standard testing procedures. The device is pre-configured and requires no additional setup from the user. You can deploy the device immediately and commence testing without any preliminary configuration steps.
For configurations requiring advanced customization, please refer to the detailed article.
Explorer standard configuration
By default, Kinéis configures the Explorer as follow:
- All sensors, including GNSS, are activated
- Sensor acquisition occurs every hour
- Messages are repeated 4 times
First-time use
To initiate the boot-up process, perform a short press on the button. The LED will alternately flash green and red five times, then pause and flash green twice. This indicates that the Kinéis Explorer is beginning sensor acquisition. The device will send its first message during the next satellite pass.
Useful information
All details on the Explorer device are available on the dedicated article.
Refer to the Explorer user manuel for more recommendation about installing and commissioning.
Retrieve Explorer data
Consult the dedicated article.